The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.







Basic functions of the controller
-32-bit MCU — ARM Cortex M4. Effectively calculates the complex tasks for 3-axis stabilization.
-Allows camera control with the RC or analog joystick.
-Use several switchable profiles for different modes of operation
-Supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus.
- Battery voltage monitoring, compensating voltage drop in the PID-regulator.
- Low battery alarm (output to 5V active buzzer).
- Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3.
- Can supply up to 1A current for external devices on the 5V power line.
- Dedicated UART-socket to connect optional Bluetooth module
- Reverse-polarity protection, overheat and overcurrent protection
- USB interface for the PC connection, to configure, control and upgrade firmware.
-Graphical user interface to manage the settings. Windows / OS X / Linux versions.
- Control through the Serial-protocol using dedicated API.
- Improved attitude estimation algorythms
-Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and will make stable work in any frame position.

Specifications
-Power supply voltage: 3S to 6S
-Current handling up to 12 Amps Constant per EACH motor port
-Dimension of the board: 67(lgh)×37(wdt) x 15(hgt) mm
-Distance between the mounting holes: 45 mm
-Diameter of the mounting holes: 3 mm
-Maximum motor current: 18 A
-Weught:22g

The matching Bluetooth Module: